如何改为选股公式
X_1:=MA(CLOSE,4);
X_2:=MA(CLOSE,13);
X_3:=MA(CLOSE,24);
X_4:=MA(CLOSE,30);
X_5:=MA(CLOSE,120);
X_6:=X_2>X_3 AND X_3>X_4 AND X_4>X_5 AND X_2>REF(X_2,1) AND X_3>REF(X_3,1) AND X_4>REF(X_4,1) AND X_5>=REF(X_5,1);
X_7:=ATAN((MA(CLOSE,13)/REF(MA(CLOSE,13),1)-1)*100)*57.299999;
X_8:=120;
X_9:=MA(CLOSE,X_8);
X_10:=POW(CLOSE-X_9,2);
X_11:=MA(X_10,X_8);
X_12:=SQRT(X_11);
X_13:=X_9+2*X_12;
X_14:=X_9-2*X_12;
筹码线:REF(X_13,1),COLORYELLOW,LINETHICK2;
趋势线:MA(CLOSE,24),COLORRED,LINETHICK2;
X_15:=(3*CLOSE+OPEN+LOW+HIGH)/6;
X_16:=(20*X_15+19*REF(X_15,1)+18*REF(X_15,2)+17*REF(X_15,3)+16*REF(X_15,4)+15*REF(X_15,5)+14*REF(X_15,6)+13*REF(X_15,7)+12*REF(X_15,8)+11*REF(X_15,9)+10*REF(X_15,10)+9*REF(X_15,11)+8*REF(X_15,12)+7*REF(X_15,13)+6*REF(X_15,14)+5*REF(X_15,15)+4*REF(X_15,16)+3*REF(X_15,17)+2*REF(X_15,18)+REF(X_15,20))/210;
X_17:=MA(X_16,7);
X_18:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100;
X_19:=(HIGH-REF(CLOSE,1))/REF(CLOSE,1)*100;
X_20:=IF(CLOSE>REF(CLOSE,1),VOL,-VOL);
X_21:=SUM(IF(CLOSE=REF(CLOSE,1),0,X_20),0);
X_22:=MA(X_21,30);
X_23:=***.***ume;
X_24:=X_23>REF(HHV(X_23,30),1);
X_25:=X_21>X_22;
X_26:=IF((CLOSE-REF(CLOSE,1))*100/REF(CLOSE,1)>=10-0.01*100/REF(OPEN,1),1,0);
X_27:=HIGH>=HHV(HIGH,20);
X_28:=REF(X_26,1);
X_29:=COUNT(X_28,5)>=1;
X_30:=COUNT(X_28,13)>=1;
X_31:=OPEN<=REF(CLOSE,1) AND X_18<(-2);
X_32:=COUNT(X_31,2)>=1;
X_33:=X_29 AND X_18>2.5 AND REF(X_32,1) AND REF(X_18<2.4,1) AND X_4>0;
X_34:=X_33 AND COUNT(X_33,30)=1 ;
STICKLINE(X_26,OPEN,CLOSE,2,0),COLORYELLOW;
X_35:=HIGH>=HHV(HIGH,150);
X_36:=X_35=1 AND BARSLAST(REF(X_35=1,1))>=1 AND X_18>3;
DRAWTEXT(FILTER(X_36=1,1),LOW-0.2,5),COLORYELLOW;
X_37:=VOL>MA(VOL,89);
X_38:=X_37=1 AND BARSLAST(REF(X_37=1,1))>=6 AND HIGH>JAX.济安线 AND X_4>X_5;
STICKLINE(X_34,OPEN,CLOSE,1,0),COLORF00FF0;
X_39:=X_6 AND CLOSE>X_2 AND LOW<=X_2 AND CLOSE>OPEN AND X_7>47 AND X_30;
DRAWICON(X_34,LOW,24);
DRAWICON(X_34,LOW-0.3,25);
DRAWICON(X_34,LOW-0.6,26);
DRAWTEXT_FIX(1,0,0,0,7),COLORWHITE;
DRAWTEXT_FIX(1,0.04,0,0,HYBLOCK),COLORWHITE;
DRAWTEXT_FIX(1,0.14,0,0,8),COLORWHITE;
DRAWTEXT_FIX(1,0.18,0,0,GNBLOCK),COLORWHITE;
步骤一.将所有的显示式":",改为不显示式":="
选股条件的基本要求为只能输出1个条件式,故要先将公式中所有的显示式":"改为不显示式":=",
如果原来显示式后面接有线型描述(颜色.对齐..等),也一并删除
例如:
ma1:ma(c,5),colorred;
ma2:ma(c,10),colorgreen,POINTDOT;
.....
先改为
ma1:=ma(c,5);
ma2:=ma(c,10);
.....
步骤二.找出选股条件,并写成选股式引用:
条件的寻找方法,依不同目的,大致可分以下几种:
--------------------------------------------------------------------------------------------
1.'字'选股 如:'买'选股
方法:先找出公式中出现有'字'的地方,该式开头会以DRAW..TEXT开头,
DRAWTEXT DRAWTEXTEX DRAWYITEXT DRAWFLAGTEXT DRAWMOVETEXT
找到后,该函数(条件, ,'字')后面括号内的第1个即为条件,将该条件复制出来并加上分号即可
例如:
{求'5日均>10日均'选股}
ma1:=ma(c,5);
ma2:=ma(c,10);
DRAWTEXT(ma1>ma2,ma1,'5日均>10日均');
[解]
ma1:=ma(c,5);
ma2:=ma(c,10);
ma1>ma2;
--------------------------------------------------------------------------
2.图标选股 如:笑脸选股
方法:
先依不同软件,找出该图标的代号,
再找出公式中出现DRAWICON函数(条件, ,图标代号)的式子,对照图标的代号(括号内的第3个),如果该图标代号为所求代号,
该函数后面括号内的第1个即为条件,将该条件复制出来并加上分号即可
例如:
{求图标1选股}
ma1:=ma(c,5);
ma2:=ma(c,10);
DRAWicon(ma1>ma2,ma1,1);
[解]
ma1:=ma(c,5);
ma2:=ma(c,10);
ma1>ma2;
--------------------------------------------------------------------------------
3.A线上穿(下穿)B线选股 {上穿--金叉,下穿--死叉}
方法:A线上穿B线: cross(A,B);
A线下穿B线: cross(B,A);
例如:
{求ma1上穿ma2选股}
ma1:ma(c,5);
ma2:ma(c,10);
[解]
ma1:=ma(c,5);
ma2:=ma(c,10);
cross(ma1,ma2);
{求ma1下穿ma2选股}
ma1:ma(c,5);
ma2:ma(c,10);
[解]
ma1:=ma(c,5);
ma2:=ma(c,10);
cross(ma2,ma1);
-------------------------------------------------------------------------------------------
4.线A上拐(下拐) 选股
方法:线A上拐: cross(A,ma(A,2)); 或 cross(A,ref(A,1));
线A下拐: cross(ma(A,2),A); 或 cross(ref(A,1),A);
例如:
{求改成ma1上拐}
ma1:ma(c,5);
[解]
ma1:=ma(c,5);
cross(ma1,ma(ma1,2));
或
ma1:=ma(c,5);
cross(ma1,ref(ma1,1));
{求改成ma1下拐}
ma1:ma(c,5);
[解]
ma1:=ma(c,5);
cross(ma(ma1,2),ma1);
或
ma1:=ma(c,5);
cross(ref(ma1,1),ma1);
---------------------------------------------------------------------------------------------
5.第1次出现条件A 选股
方法:先找出条件A,
再利用cross(A,0.5);
例如:
{求改成出现图标1选股}
ma1:=ma(c,5);
ma2:=ma(c,10);
DRAWicon(ma1>ma2,ma1,1);
[解1]
ma1:=ma(c,5);
ma2:=ma(c,10);
A:=ma1>ma2;
cross(A,0.5);
[解2--直接将条件A写入]
ma1:=ma(c,5);
ma2:=ma(c,10);
cross(ma1>ma2,0.5);
-------------------------------------------------------------------------------------------
6.线变色选股 如:黄线变红色选股 (指标线为黄线,再利用函数变红色线)
方法:先依不同软件,找出条件A,
再用cross(A,0.5);
(1)飞狐
条件在PARTLINE(条件A, ),colorred;括号内的第1个即为条件,将该条件复制出来并加上分号即可
例如:
{求黄线变红色选股 飞狐}
ma1:ma(c,5),coloryellow;
PARTLINE(ma1>REF(ma1,1),ma1),colorred;
[解]
ma1:=ma(c,5);
A:=ma1>REF(ma1,1);
cross(A,0.5);
(2)大智慧L2.分析家
条件在PARTLINE( ,条件A,rgb(255,0,0), , ...);
括号内为rgb(255,0,0)的前1个即为条件,将该条件复制出来并加上分号即可
例如:
{求黄线变红色选股 大智慧L2.分析家}
ma1:=ma(c,5);
PARTLINE(ma1,ma1>REF(ma1,1),rgb(255,0,0),1,rgb(255,255,0));
[解]
ma1:=ma(c,5);
A:=ma1>REF(ma1,1);
cross(A,0.5);
(3)通达信
条件在IF(条件A, ,DRAWNULL),colorred;括号内的第1个即为条件,将该条件复制出来并加上分号即可
例如:
{求黄线变红色选股 通达信}
MA1:MA(C,5),COLORYELLOW;
IF(MA1>REF(MA1,1),MA1,DRAWNULL),COLORRED;
[解]
MA1:=MA(C,5);
A:=MA1>REF(MA1,1);
CROSS(MA1>REF(MA1,1),0.5);
--------------------------------------------------------------------------------
7.颜色柱选股
方法:先找出公式中出现有STICKLINE函数的地方,
找到后,核对该函数后面的颜色,是否为所求颜色,
若颜色相同,则括号内的第1个即为条件A,将该条件复制出来并加上分号即可
例如:
{求红色柱选股}
STICKLINE(c>o,h,l,0.8,1),colorred;
[解]
A:c>o;
{求第1次红色柱选股}
STICKLINE(c>o,h,l,0.8,1),colorred;
[解]
A:=c>o;
cross(A,0.5);
步骤三.最后将所有绘图函数及单一输出值(如 0; k; if(,,); )全删除,使公式只剩1个选股式输出即成,
(若有2个以上条件,条件同时成立时,可在条件间用"and"连接;
若有2个以上条件,允许条件不同时成立时,可在条件间用"or"连接)；